| Type | BDK3 | BDK10 | BDK100 |
| Measuring range | ±3g (ca.±30m/s2) | ±10g (ca.±100m/s2) | ±100g (ca.±1000m/s2) |
| Resolution | <10-3g | <5·10-3g | <5·10-2g |
| Frequency range | 1....300Hz | 1....800Hz | 1....1500Hz |
| Sensitivity at Ub = 5Volt | appr.150mV/g | appr.60mV/g | appr.15mV/g |
| Temperature drift of sensitivity | <+6·10-2 % / K |
| Temperature drift of zero point | <0.1mV/K |
| Zero offset | (2.5±0.1)Volt - generally: 0.5Ub±4% |
| Output impedance | approx. 100 Ohm |
| Linearity deviation | <1% |
| Transverse sensitivity | <1% |
| Mechanical overload resistance in direction of measurement | approx.10 000g (appr.100 000m/s2) ! |
| Nominal supply voltage (regulated) | UbN = 5Volt |
| Permissible supply voltage range | Ubz=2V ... 16V |
| Current drawn at Ub = 5V | approx. 2mA |
| Degree of protection | IP65 |
| Operating temperature | -40°C ... +85°C |
| Storage temperature | -45°C ... +90°C |
| Weight in stainless steel housing with thread without cable | approx. 17Gramm |
| Weight in small housing without cable | approx. 7Gramm |
| Standard electrical connection | 3 highly flexible, color-coded wires ø1mm length approx.18 cm (special lengths on request) |
| Alternative electrical connection for sensors in stainless steel housing | 0.5m strong, flexible, shielded cable, 2 wires + shield, ø2.1mm (special lengths on request) |
